Call 802-280-3100
IICRC logo

Call NOW 802-280-3100


Why use a professional mold abatement company?

mold in kitchen partition wall living room wall dining room mold dining room wall skylight leak causing mold
Imagine coming home from vacation, the heat failed and a pipe froze up.
This is how it looked for the owners of this townhouse in Hartford VT.

Our professional restoration technicians know that damage increases and restoration costs escalate the longer you wait. That is why we will be there quickly to make it like it never happened. Insurance may not cover the costs if your try to do it yourself and you can make the problem worse if cross contamination happens. We will work with our insurance company to make it like it never happened.

The causes of mold and the proper way to remove it is easy to understand. But the work needed to be done to correctly remove it requires special equipment and training.

If your problem is bathroom, kitchen, or a small area then see our mold removal facts page. but if the issue was caused by water entering the premisses from the outside, sewer back up, or anything listed as above category 1 on the water damage checklist then you need IICRC certified professions like the RestorEaze team.

This page will explain the process of removing mold from an area of your home or business.
RestorEaze is locally owned and serve the central VT NH Upper Valley region. We offer complete mold removal and abatement services
We will be the only source you need by coordinating with your insurance carrier and we use local plumbers, electricians, roofers, carpenters, carpet installers, flooring installers giving you peace of mind that any issues that may arise after it is done will be responded to and remediated quickly.



Mold Assessment

  • Origin
    This is the first step to determining the amount of clean up will be needed. See the classes of water damage to understand what is being looked for. Where did the moisture come from to create the growth of mold and how long has it been that the area was exposed to water or moisture..
  • Mold assessment identity; means a process performed by a mold assessor that includes the physical sampling and detailed evaluation of data obtained from a building history and inspection to formulate an initial hypothesis about the identity,location, and extent of amplification of mold growth of greater than 10 square feet. This testing may be required by your insurance company. But if not, then testing may not be needed.
    Because if it looks like mold.
    If is smells like mold
    Most likely it is mold,and you want it removed regardless of what kind it is. The exception would be if occupants are being treated for respiratory issues and their medical team needs to know about the types of fold and fungus are present in the building.
  • Location of mold;
    find all areas that have mold growth or have been exposed to mold spores that could cause mold to continue to infect the area and consider the possibility of hidden contamination. Check inside of air ducts and air handling units.
  • Extent;
    How much area is involved in sq. ft..

The process of elimination of mold.

  • Dry out contractors vs. remediation companies.
    are trained to do In-Place Drying. If they find mold they don’t get the job, so they never find mold. We are both. Using a wet dry vacuum, sponge mops, or towels, remove as much water as possible. Our professionals will bring special suction mats and other specialized equipment to draw the water out of the space. we will use powerful fans and dehumidifiers to dry the area.
    Prior to opening up the walls to remove saturated sheetrock, insulation and other materials, we perform the assessment to determine the extent of the issue and what areas need to remediated
  • Contamination Control;
    To prevent cross contamination we will isolate the contaminated area from the rest of the building. We will use plastic barriers, tarps, close off air ducts.
    We will use negative pressure to draw out mold spores and prevent them from invading other areas.
  • Expose the affected areas to look for the source..
    Expose walls at least a foot higher than the water level.
    Sheet rock, insulation, need to be removed. Plywood and other building materials need to be dried thoroughly and treated with an antimicrobial chemical before covering back up.
  • Concealed areas and pockets of saturation and cavities need to discovered and opened up. Investigate gaps under mechanical spaces like boiler and furnaces, under cabinets and furniture, and in crawl spaces. We use specialized equipment to discover hidden moisture.
  • Cleaners, sealants,and encapsulant will be applied to make the areas more resistant to water damage and mold growth. We will then seal the area to prevent future moisture penetration if possible.
  • Last we till clean the area and scrub the air of airborne mold spores using HEPS filters and negative pressure ventilation if needed.

Help is on the way!

Our Goal is to resolve a bad situation with no more added stress.
We will handle the paperwork and get approval from your insurance company to maximise your recovery of benefits.
Please read through our website to get an understanding of our approach to putting your life back to normal.


Acker Contracting and RestorEaze will make it better than before.

Office hours: Monday - Sunday 24/7
30 US Route 5, Windsor, VT 05089 (just off I-91 Exit 9)
phone_iphoneCall 802-280-3100
©2000-2023 Restoreaze
Locally Owned and Operated We are conveniently located in White River Junction, so we can respond quickly to flooding
and water damage emergencies in the Upper Valley, and its surrounding towns.
Hanover, NH
Lebanon, NH
West Lebanon, NH
Enfield, NH
Lyme, NH
Claremont, NH
Norwich, VT
White River Junction, VT
Hartford, VT
Windsor, VT
Woodstock, VT
Thetford, VT

Website design and hosting by Business Services Consultants